Need help with trim chip

View previous topic View next topic Go down

Need help with trim chip

Post by power5000 on Sat Nov 05, 2011 5:03 pm

Hi I have jsut started using rigidchips and stuff tryed to make a simple plant but yaw ont work cuz i cant get the trim chip to go from -45 degrees to 90 but still be able to turn.... please help sorry for the noob problem.

power5000
Car
Car

Posts : 5
Join date : 2011-11-05

View user profile

Back to top Go down

Re: Need help with trim chip

Post by darkeye22 on Tue Nov 08, 2011 3:39 pm

uhh you mean you want it to be at -45 degrees and press a button and it will go to 90 degrees? sorry i don't really understand the question can you reword it/go into more detail?
avatar
darkeye22
Tank
Tank

Posts : 55
Join date : 2011-06-01
Location : Stuck inside RigidChips trying to find a way out

View user profile

Back to top Go down

Re: Need help with trim chip

Post by power5000 on Tue Nov 08, 2011 6:54 pm

ok the chip I'm attaching the trim to is at -45 degrees i need to change it to 0 (up and down on the y axis) and rotate on the y axis. Is this possible?

power5000
Car
Car

Posts : 5
Join date : 2011-11-05

View user profile

Back to top Go down

Re: Need help with trim chip

Post by darkeye22 on Tue Nov 08, 2011 7:46 pm

Ok, so if i understand you right you want it so its at a -45 degree angle you press a button and it turns to a 90 degree angle (90 degrees is up and down on the y axis) and then you want it so you can turn it on the y axis with out it being connected to the Trim? Sorry if i still don't understand you -_-


EDIT: To answer your question there is not anyway that i know of to do what you are trying to explain unless i still don't understand you >_>
avatar
darkeye22
Tank
Tank

Posts : 55
Join date : 2011-06-01
Location : Stuck inside RigidChips trying to find a way out

View user profile

Back to top Go down

Re: Need help with trim chip

Post by power5000 on Tue Nov 08, 2011 11:54 pm

no i just want it to be at 90 degrees I need to change set the angle to 90 degrees so like it started there but then have it be able to change te angle with X button so like (angle=90) but for buttons it needs to be (angle= yaw)

power5000
Car
Car

Posts : 5
Join date : 2011-11-05

View user profile

Back to top Go down

Re: Need help with trim chip

Post by darkeye22 on Wed Nov 09, 2011 9:01 am

You mean you want to make a rudder to steer the plane?
avatar
darkeye22
Tank
Tank

Posts : 55
Join date : 2011-06-01
Location : Stuck inside RigidChips trying to find a way out

View user profile

Back to top Go down

Re: Need help with trim chip

Post by T-Bouw on Fri Dec 09, 2011 3:48 am

Sorry for the late reply but I haven't been active on the forum for a long time.

Could you post your model so we can help you beter?
Also, have you read my tutorial about analogue controls? It might help a little.

Though it sounds like you haven't setup your "yaw" variable correctly.
Make default: 90 (how you want the starting angle to be)
Max: 135 (90 + 45)
Min: 45 (90 - 45)
Step: (around the same value as what you set in the keys-section)

Hope this helps!
avatar
T-Bouw
Car
Car

Posts : 22
Join date : 2010-07-22
Age : 34
Location : The Netherlands

View user profile

Back to top Go down

Re: Need help with trim chip

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum